GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 8-4 - Software Installation 8-157
8-4-4-6 Verifying the VCR (if necessary)
1.) Press Record button, VCR menu shows up at the bottom of the screen.
2.) Click Counter Reset, then Press Record menu to start recording.
Displays a red dot in the VCR status area on the Title bar to indicate that recording has begun.
3.) Press Stop to stop recording the tape at the desired moment.
4.) Press Search to adjust the starting time for video playback.
5.) Press Play to start VCR playback.
Figure 8-214 VCR Menu
Figure 8-215 Record Menu
Figure 8-216 VCR Status
To Next Page
Loading...
