GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
8-162 Section 8-4 - Software Installation
8-4-4-10 Product Type Check of the System
To verify that the correct version of Application software was installed, check the Product Type of the
Application software. Verification steps are listed below.
1.) Turn on the system. Wait until the screen comes up.
2.) Press the
Utility key and click Admin tab.
3.) Check the value of
Product item.
4.) The following table is the matching table.
Figure 8-224 Checking Product Type
Installed Application Value of Product item
P5 Radiology.Arirang
A5 Radiology.Arirang.BW
A5Pro (A5 w/o PW) Radiology.Arirang.BW2
Table 8-59 Product Type Matching Table
To Next Page
Loading...
