GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 8-6 - Software Reloading 8-171
8-6-2-1 Perform Software Reloading in the Service Platform (cont’d)
15.)Setup is completed successfully
a.) If you do s/w reloading from the system directly, please shut down the system now.
b.) For remote s/w reloading, please enable Disruptive mode.
16.)Press “Disruptive mode”
Figure 8-235 setup completed message
Figure 8-236 Disruptive mode
To Next Page
Loading...
