GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 9-6 - System maintenance 9 - 15
9-6-5-3 Basic Probe Cleaning and/or Disinfection
Refer to the Basic User Manual of LOGIQ™ S8 for details on cleaning.
CAUTION
!! CAUTION:
Failure to follow the prescribed cleaning or disinfection procedures will void the probe’s
warranty. DO NOT soak or wipe the lens with any product not listed in the LOGIQ™ S8 Basic
User Manual and/or care card. Doing so could result in irreparable damage to the probe and/or
LOGIQ™ S8 system.
CAUTION
!! CAUTION:
Follow the Care Card instructions supplied with each probe (inside the transducer boxes)
for disinfectants and gels that are compatible with the surface material of the probes.
CAUTION
!! CAUTION:
To help protect yourself from blood borne diseases, when cleaning and handling probes,
wear approved, non-allergenic disposable gloves.
NOTICE
!! NOTICE:
Disinfect a defective probe before you return it. Be sure to tag the probe as being disinfected.
CAUTION
FibroScan probe does not have resistance to water. DO NOT immerse FibroScan probe into any
liquid
CAUTION
CAUTION:
Please be aware of the
sensitive probe head.
TAKE EXTREME CARE!
NEVER place or store a
probe on its scan head!
When disinfecting a probe,
ensure that there is sufficient
space between the probe and
the container bottom!
To Next Page
Loading...
Need help?
General
