GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
3 - 32 Section 3-8 - System Configuration
Section 3-8
System Configuration
3-8-1 Purpose of this section
This section describes how to configure the LOGIQ S8.
After completing configuration, as described in this section, next step is to control/adjust connectivity
settings, starting with Section 3-11 "Connectivity Setup" on page 3-66.
3-8-2 System Configuration
For complete instructions, refer to the Basic User Manual, Chapter 16 (R1 to R3) or Chapter 10 (R4) in
eDoc CD provided with the system or BUM on CDL.
When setting up R4.2.5x systems, select the lowest security level when the system is first booted up.
This will allow the system to be tested by Service before handing it over to the system administrator to
apply the security level they wish to use.
To Next Page
Loading...
Need help?
General
