GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 3-7 - Power On/Off 3 - 31
15.)Use one of the methods to access/unlock the system:
- Connect a USB Flash Drive to the system.
-Select Password and type the password in the field.
-Select Recovery key and then type in the recovery key in the field.
Figure 3-22 Disk Encryption - Unlock
Secure the password and recovery key (including USB memory)
It is recommended the recovery key is stored in a USB flash drive and printed out.
If both password and recovery key are lost, you will not be able to access archived patient data (images
and measurements included) nor store new patient data on this system.
The only way to recover the system to allow storing patient data is to reset the entire disk that deletes
all the archived patient data in the disk.
It is strongly recommended that all the patient data be stored in PACS or backup to external media.
To Next Page
Loading...
Need help?
General
