GE Multilin g60 User Manual

GE Multilin G60 Generator Protection System 5-15
5 SETTINGS 5.2 PRODUCT SETUP
5
5.2.4 COMMUNICATIONS
a) MAIN MENU
PATH: SETTINGS  PRODUCT SETUP  COMMUNICATIONS
b) SERIAL PORTS
The G60 is equipped with up to three independent serial communication ports. The faceplate RS232 port is intended for
local use and is fixed at 19200 baud and no parity. The rear COM1 port type is selected when ordering: either an Ethernet
or RS485 port. The rear COM2 port be used for either RS485 or RRTD communications.
 COMMUNICATIONS

 SERIAL PORTS

See below.
MESSAGE
 NETWORK

See page 5–17.
MESSAGE
 MODBUS PROTOCOL

See page 5–17.
MESSAGE
 DNP PROTOCOL

See page 5–18.
MESSAGE
 DNP / IEC104
 POINT LISTS
See page 5–21.
MESSAGE
 IEC 61850 PROTOCOL

See page 5–22.
MESSAGE
 WEB SERVER
 HTTP PROTOCOL
See page 5–35.
MESSAGE
 TFTP PROTOCOL

See page 5–36.
MESSAGE
 IEC 60870-5-104
 PROTOCOL
See page 5–36.
MESSAGE
 SNTP PROTOCOL

See page 5–37.
MESSAGE
 EGD PROTOCOL

See page 5–37.
MESSAGE
 ETHERNET SWITCH

See page 5–39.

GE Multilin g60 Specifications

General

Brand	GE
Model	Multilin g60
Category	Protection Device
Language	English