Chapter B6 Setting up the GSM/GPRS
module (NX-7002)
Overview
In case you want to add GSM/GPRS functionality to the panel, you need to use an NX-10 model
which has the GSM/GPRS on-board or you need to add a separate NX-7002 module. Only one
GSM/GPRS module can be used and will have module number 78. The GSM/GPRS module features
include:
• Wireless event reporting.
• 12 configurable report destinations.
• Selectable reportable events from four partitions.
• Compatible with PSTN or ISDN reporting.
• PSTN/ISDN can be used as backup.
• SIA reporting using TCP/IP over GPRS.
• XSIA reporting using TCP/IP over GPRS.
• Contact ID reporting using TCP/IP over GPRS.
• Contact ID or SIA reporting formats over SMS.
• HomeText (plain language) SMS reporting.
• SIA reporting with optional partition modifiers using SMS messages.
• XSIA reporting using SMS text messages.
• Control panel can use GSM in addition to PSTN (reporting all panel protocols using
GSM).
• Wireless upload/download using GSM CSD connection.
• Wireless upload/download using a GPRS connection.
• Upload/download may be initiated remotely or locally.
• Optional automatic download sessions. These normally follow test calls. Test call
reporting can be switched off so that there is automatic download calls without test
report calls.
• Provides backup for the panel and external dialers.
Enrolling the GSM/GPRS module
When you select the enrol modules process, the GSM/GPRS module is enrolled on both the control
panel and the keypad. The keypad must enrol the module in order to display the relevant menu
options. To verify enrolling, check that the event log contains an enrol event for the GSM/GPRS
module.
To Next Page
Loading...
Need help?
General
