Setting timers
You can set timers to control the duration of various system functions. The following example sets
the internal siren timer to five minutes. When the siren starts ringing, the timer starts counting down.
When the timer is finished, the siren automatically stops.
1. Ensure the advanced menu is enabled.
2. Navigate with the ½¾ keys to Control Panel>System Settings and press OK.
3. Scroll to Timers>Sounders>Internal Siren Timeout and press OK.
4. Enter 5 and press OK.
5. The keypad beeps once to confirm the change and returns to Internal Siren Timeout.
Configuring system features
You can specify various system features, enable the tests that can be performed on the control panel
and set clock options. The following example programs the control panel to activate the siren and
make a manual test call to the central station during the do self tests.
1. Ensure the advanced menu is enabled.
2. Navigate with the ½¾ keys to Control Panel>System Settings>Feature Select and press
OK.
3. Scroll to Diagnostics>Manual Siren Test>Enabled and press OK.
4. The keypad beeps once to confirm the change and returns to Manual Siren Test.
5. Scroll to Manual Dialer Test>Enabled and press OK.
6. The keypad beeps once to confirm the change and returns to Manual Dialer Test.
To Next Page
Loading...
Need help?
General
