GE Optima IGS 330 - 5570895- Base Plate Assembly Kit; 2285054 - Templates; 2285056 - A;C;N Templates; 2186109 - EP Template

3.3.3.3 5570895- Base plate assembly Kit
Table 2-18:
Item Name Part # Description Quan. Notes
Hex Screws 1006-
M20C060-04
Screw M20x60, Class 8.8, Zinc
Plated
12 pc For Base plate assembly
Hex Screws 1006-
M16C060-04
Screw M16x60, Class 8.8, Zinc
Plated
4 pc For Omega
Washer,
Flat
2001-M16-02 Washer M16 4 pc For Omega
Nut, Hex 3000-M16C-04 Hexagon Nut, M16-2.0, Grade 8
Steel, Zinc Plated
4 pc For Omega
NOTE: The kit 5570895 Base plate assembly kit is needed when the floor plate is installed
and is for China installation only.
3.3.3.4 2285054 – Templates
3.3.3.4.1 2285056 - A/C/N Templates
Table 2-19:
Item Name Part # Description Quan. Notes
A/C/N Tem‐
plates
2185979 LC Positioner and Omega C/N Pa‐
tient Table floor mounting tem‐
plate
1 pc See Illustration 2-63
2127792 LCV+ Gantry and Omega A Pa‐
tient Table floor mounting tem‐
plate
1 pc
3.3.3.4.2 2186109 – EP Template
Table 2-20:
Item Name Part # Description Quan. Notes
EP Tem‐
plate
2186109 LCV+ Gantry and EP Patient Ta‐
ble floor mounting template
1 pc
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
128 3 Room Structural Requirements