1.2 Pre-Installation Process
Complete the checklists in ROOM LAYOUTS, ELECTRICAL REQUIREMENTS, and GENERAL
REQUIREMENTS of this manual. They represent an important part of the pre–installation
process. The checklists summarize the required preparations and allow to verify the proper
completion of the pre–installation procedures.
You will find hereafter a chart of the information flow in the pre-installation process.
Illustration 1-1:
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
22 1 Objectives & Overview
To Next Page
Loading...
