Illustration 2-66: SPECIFICATIONS FOR A TYPICAL 17’–10” (5.44 M) INBOARD
STATIONARY RAIL MOUNTING INTERFACE (BOTH RAILS CEILING MOUNTED), FOR
MAVIG SUSPENSION
Table 2-22: Stationary rail in different length
Rail length mm (ft) A C D INBOARD RAILS
4,724 (15’6”) 7*660.4=4,623 51 B0186JA
5,639 (18’6”) 8*660.4=5,283 254 51 B0222JA
5,791 (19’) 8*660.4=5,283 406 51 B0228JA
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Chapter 2 Equipment Requirements 133
To Next Page
Loading...
