GE V7768 - Table 1-1 V7768 Connectors and Switches; Table 1-2 Universe IID Mapping;Sysfail Generation - Switch (S6); Table 1-3 VME Strapping - Switch (S7)

22 V7768/V7769 Hardware Reference Manual
Table 1-1 V7768 Connectors and Switches
Connector Function
P1 VME interface connector
P2 USB 2.0, Serial ATA, digital video, COM3 and COM4, Gigabit Ethernet
P7 CompactFlash socket
J34 SODIMM socket
J29 and J30 USB ports
J38 Mouse/Keyboard PS/2 Type connector
J15 and J18 Gigabit Ethernet connectors
J11, J12, J13 and J14 PMC Site connectors
J35 Serial port connector (COM1)
J28 SVGA connector
J37 Board to Board connector for V7769
Header Function
E13 COM1 Configuration
E14 COM1 Configuration
E17 COM1 (RS422 Termination)
Switches Function
S6 Mapping/Sysfail generation
S7 VME SYSRESET
S8 Factory Configurable
S9 Factory Configurable
S10 System Controller
S11 Battery enable
S12 RTC Reset and Boot Pause
Table 1-2 Universe IID Mapping/SYSFAIL Generation - Switch (S6)
Position State Function
1-4 On Enable SYSFAIL Generation
1-4 Off NO SYSFAIL after reset
2-3 On Map UNIV2 to Memory Space
2-3 Off Map UNIV2 to I/O Space
Table 1-3 VME Strapping - Switch (S7)
Position State Function
1-4 On Enable VME SYSRESET Driver
2-3 On Enable SYSRESET Receiver