The EZ Program Store device plugs directly into port 2 on a VersaMax PLC. No cables or
connectors are required. Power for the device comes from port 2. Because the EZ
Program Store device is not used during normal operation, it does not need to be screwed
down to the PLC. The device can be hot inserted and hot removed without disrupting the
system.
Features
• 2-Megabit Serial Data Flash for non-volatile storage
• Pushbutton initiates update from the device to a PLC
• Dual color status LED
• Configurable OEM key password protection
• Compatible with all VersaMax CPU models, release 2.10 and later.
294 GFK-1503E VersaMax PLC User Manual
For public disclosure
To Next Page
Loading...
