Parameters
Description
Status Length
This value is automatically set to either 80 bits (for %I and %Q Status
address locations) or 5 words (for %R, %AI, and %AQ Status
address locations).
Network Time Servers
IP addresses of up to 3 NTP time servers used to synchronize
timestamps in produced Ethernet Global Data exchanges. If no NTP
time servers are configured here, the Ethernet interface is initialized
from the clock in the CPU instead. Refer to the section,
Timestamping of Ethernet Global Data Exchanges in chapter 13 for
more information. (This feature is supported in IC200CPUE05-HK
and previous versions only.)
84 GFK-1503E VersaMax PLC User Manual
For public disclosure
To Next Page
Loading...
