Settings
Vscan Extend – User Manual 4-17
5721203-100 Rev. D
Storage Access
A device PIN has to be created for security purposes to access
or store images/ videos. This PIN is created prior to the first use
or after the system has been reset. Once the PIN is set, the
user is prompted for the PIN every time the device is powered
ON or after the session duration time has expired.
1. Create a new PIN for data storage and access, for e.g.,
1234.
Figure 4-23. User PIN
2. Confirm the new PIN for security purpose. Confirmation is
only required after PIN creation.
Figure 4-24. Confirm PIN
To Next Page
Loading...
