EasyManua.ls Logo

GE Vscan Extend - Chapter 7 - Appendix; Specifications; Dimension and Weight; Phased Array Transducer for Deep Scanning

GE Vscan Extend
251 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
7-2 Vscan Extend – User Manual
5721203-100
Rev. D
Specifications
Dimension and weight
System dimension and weight
• Main unit (approximately): 170 x 78 x 21 mm
• Weight (Main unit with Sector probe, without battery): 365g
• Weight (Main unit with Dual probe, without battery): 400g
• Battery Weight: 65g
Probe dimension and weight
• Dimension (L x B x H) Sector Probe:129 x 32 x 25 mm
• Dimension (L x B x H) Dual Probe: 129 x 39 x 28 mm
• Sector probe Weight (including cable): 85g
• Dual probe Weight (including cable): 120g
Phased array transducer for deep scanning
• Field-of-view for black and white imaging: up to 70 degrees
with maximum depth of 24 cm
• The color flow sector represents blood flow within an angle
of 40 degrees.
• Broad-bandwidth sector probe: from 1.7 to 3.8 MHz
• Footprint: 13 x 19 mm
Linear transducer for shallow scanning
• Field-of-view for black and white imaging: aperture width of
2.9 cm with maximum depth of 8 cm
• The color flow sector represents blood flow over image with
full aperture and entire depth.
• Broad-bandwidth linear probe: from 3.3 to 8.0 MHz
• Footprint: 9 x 35 mm

Table of Contents