Vscan Extend Maintenance
6-12 Vscan Extend – User Manual
5721203-100
Rev. D
Upgrade software
Scanner software
You can upgrade the currently installed software to a software
version equal to or greater than your current version.
NOTE: Before proceeding with the upgrade, ensure that the battery is
fully charged and the charger is plugged in.
To perform a software upgrade:
1. Remove the battery. See ‘To remove the battery’ on
page 3-20 for more information.
2. Remove the microSD card that captures the error log files
from the device (lightly push the SD card holder and pull out
the SD card).
3. Insert the application software microSD card.
Figure 6-3. Insert SDcard
To Next Page
Loading...
