Review and recall of stored data
Vscan Extend – User Manual 5-45
5721203-100 Rev. D
Restore
NOTE: The restore operation does not restore backed up logs.
1. Power OFF the Vscan Extend.
2. Remove the Battery. See ‘Inserting/removing the battery’ on
page 3-20 for more information. Remove the microSD card
containing the log files from the device and insert a blank
microSD card.
3. Remove the microSD card containing the log files from the
device and insert the microSD card with the backed up data.
See Figure 6-3 on page 6-12 to insert the SD card.
4. Press Menu -> Settings -> Restore.
Figure 5-42. Restore
CAUTION
The restore procedure overwrites the existing data on the
Vscan Extend.
When restoring previously-backed up patient data, you must
first backup the current patient data as the restore procedure
overwrites the existing data. See ‘Backup’ on page 5-42 for
more information.
Make sure to insert the correct microSD card.
To Next Page
Loading...
