Vscan Extend Battery
Vscan Extend – User Manual 3-15
5721203-100 Rev. D
Vscan Extend Battery
Battery
The Vscan Extend system is powered by a Li ION battery
(Model - U80395). The battery is not fully charged prior to
shipment. To maximize time of use, it is recommended to
recharge the battery before use for at least 1.5 hours. Establish
a routine for charging the battery to maximize system
availability.
The battery must be charged while housed in the Vscan Extend
or in the external battery charger.
The Li ION battery, used in Vscan Extend, with the battery code
is displayed below.
Figure 3-9. Vscan Extend battery
Battery specification
Table 3-7: Battery specification
Items Unit Value Description
Basic Voltage mV 7400 MAX
Current mA 1150 Avg 1C