ActionStep
Tap Release FlexFactory Control.2
Result: FlexFactory control of XDUO mixer is disabled. The FlexFactory
Control message on the top toolbar is replaced by Local Control.
Start and stop data logging
Data logging saves the data to the memory card on the HMI. The data can then be
transferred manually to a USB memory stick using the USB port, or directly to an external
computer using the Ethernet port.
Follow the instructions below to start or stop logging data.
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD 205
7 Operation
7.3 Operate Xcellerex XDUO mixer
7.3.1 Start up the system
To Next Page
Loading...
Need help?
General
