7.5 Add solid contents
Introduction
This section describes how to add solid material into the disposable bag. The information
is applicable for both XDM and XDUO mixers.
Consider before addition
Before addition, consider the following aspects:
•
Add solid material only while the agitation is switched on. This prevents aggregation
near the agitator.
•
Use fine grained material. Large crystals or granular material dissolves slowly and
can damage the disposable bag material.
•
Add solid material near the end of the liquid addition process, if possible.
•
Add solid material slowly to avoid supersaturated solutions in the mixer.
•
Consider using a hoist when lifting large containers with solid material.
Add solid material into
disposable bag
Any addition port with 3″ connection or a powder bag with gasket can be used for addition
of solid material. Follow the instructions below to add solid contents into the disposable
bag.
CAUTION
Heavy object. The container with solid ingredients is heavy. Use
caution when filling the disposable bag from the top of the mixer,
to avoid personal injury.
236 Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
7 Operation
7.5 Add solid contents
To Next Page
Loading...
Need help?
General
