GE Xcellerex XDM Series - Prepare and Install Probes for Xcellerex Mixer

6.4 Prepare and install the probes
Introduction
This section gives information on how to prepare and install the probes into the disposable
bag. This section is relevant for the Plus and Plus Flex bag assembly.
In this section
See pageSection
1586.4.1 Calibrate the pH probe
1636.4.2 Prepare the conductivity probe
1656.4.3 Autoclave probe sheath assembly
1686.4.4 Insert probes into the disposable bag
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD 157
6 Preparation
6.4 Prepare and install the probes