GEA VARIVENT X R Series User Manual

4. Use the insertion tool to press in the
V-ring
– press in evenly at several op-
posite points along the circumference.
5. Insert the V-ring evenly
.
6. Replace all the other seals identied in the spare parts lists.
Þ
V-ring has been exchanged.
INFO Used seals must not be used again, since the proper function of the
seal can then no longer be ensured.
86 / 104 - 9.7 Maintenance
0000000881 - 001 - EN-GB

GEA VARIVENT X R Series Specifications

General

Brand	GEA
Model	VARIVENT X R Series
Category	Control Unit
Language	English