6.2 Restarting
The following principles apply for restarting:
●
Only allow pr
operly
qualied staff to set the valve into operation.
●
Make sure all connections are connected properly.
●
The safety devices for the valve must be complete, fully functional and in perfect
condition. Check the function before starting any work.
●
When the valve is switched on, the danger zones must be free.
●
Remove any liquids that have escaped without leaving residues.
42 / 104 - 6.2 Restarting
0000000881 - 001 - EN-GB
To Next Page
Loading...
