GEA VARIVENT X R Series - Dismantling the Valve Insert into Individual Parts

9.5.6 Dismantling the valve insert into individual parts
Tools
●
Belt wrench
●
Jaw wrench a/f 10
●
Jaw wrench a/f 13
●
Jaw wrench a/f 17
●
Jaw wrench a/f 21
●
Jaw wrench a/f 23
1. Loosen the clamp connection (46) be-
tween the actuator and the lantern.
®
The lantern can be turned to al-
low the jaw wrench to be posi-
tioned to release the lock nut
(10).
2. Hold the lock nut (10) tight on the
wrench at surface (10.1) with a jaw
wrench.
3. Turn the actuator with a belt wrench
and release the valve disk (15).
10.1
10
46
15
62 / 104 - 9.5 Removing the valve
0000000881 - 001 - EN-GB