GEA VARIVENT X R Series - Mounting Connection

9.6.6 Mounting connection 0
Tools
●
Hex key, a/f 3
●
Jaw wrench a/f13
1. Place the actuator cover (138) onto
the actuator.
2. Mount the half-rings (B12) onto the
actuator cover.
®
Ensure that the half-rings are
mounted correctly!
Observe torques, see 9.6.1 Tight-
ening torques .
3. Screw the reduction nipple (130) with
the air connection (117) into the ac-
tuator.
®
Observe torques, see 9.6.1 Tight-
ening torques .
117
B12
B12
130
138
Þ
Connection 0 has been mounted.
9.6 Installing the valve - 71 / 104