gefran 650 - Examples and Application Notes

80208G_MHW_650-1250-1350_01-2017_ENG
135
4. CONFIGURATION
Acronym Scrolling message Submenu Attributes
C.LO US.CAL R W
The parameter shows and sets the minimum analog output value.
You can change the displayed value with the and keys.
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter.
Unit of measurement: Converter points
Options: 0...65535
4.25.15. C.HIG - Setting analog output maximum
Acronym Scrolling message Submenu Attributes
C.HIG US.CAL R W
The parameter shows and sets the maximum analog output value.
You can change the displayed value with the and keys.
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter.
Unit of measurement: Converter points
Options: 0...65535