gefran 650 User Manual

80208G_MHW_650-1250-1350_01-2017_ENG
60
4.6.15. ENBL.3 - Consent 3 to execute step
Acronym Scrolling message Submenu Attributes
ENBL.3 STEP ENABLE FOR STEP START PR.SPT R W
The parameter shows and sets consent 3 condition to enable execution of the step.
See ENBL.1 for details.
4.6.16. ENBL.4 - Consent 4 to execute step
Acronym Scrolling message Submenu Attributes
ENBL.4 STEP ENABLE FOR STEP START PR.SPT R W
The parameter shows and sets consent 4 condition to enable execution of the step.
See ENBL.1 for details.
4.6.17. EVN.R.1 - Event 1 during step ramp
Acronym Scrolling message Submenu Attributes
EVN.R.1 EVENT DURING STEP RAMP PR.SPT R W
The parameter shows and sets the configuration of event 1 during the step ramp.
Unit of measurement: -
Options: nonE = Event not modified
On = Event becomes active
OFF = Event becomes inactive
4.6.18. EVN.R.2 - Event 2 during step ramp
Acronym Scrolling message Submenu Attributes
EVN.R.2 EVENT DURING STEP RAMP PR.SPT R W
The parameter shows and sets the configuration of event 2 during the step ramp
Unit of measurement: -
Options: nonE = Event not modified
On = Event becomes active
OFF = Event becomes inactive
4.6.19. EVN.R.3 - Event 3 during step ramp
Acronym Scrolling message Submenu Attributes
EVN.R.3 EVENT DURING STEP RAMP PR.SPT R W
The parameter shows and sets the configuration of event 3 during the step ramp.
Unit of measurement: -
Options: nonE = Event not modified
On = Event becomes active
OFF = Event becomes inactive
4. CONFIGURATION

gefran 650 Specifications

General

Brand	gefran
Model	650
Category	Temperature Controller
Language	English