gefran ADV200 User Manual

164 ADV200 • Functions description and parameters list
23.4.37 4270 Fieldbus S->M10 ipa FBM2SIPA 0 0 20000 RW FVS
23.4.41 4280 Fieldbus S->M11 ipa FBM2SIPA 0 0 20000 RW FVS
23.4.45 4290 Fieldbus S->M12 ipa FBM2SIPA 0 0 20000 RW FVS
23.4.49 4300 Fieldbus S->M13 ipa FBM2SIPA 0 0 20000 RW FVS
23.4.53 4310 Fieldbus S->M14 ipa FBM2SIPA 0 0 20000 RW FVS
23.4.57 4320 Fieldbus S->M15 ipa FBM2SIPA 0 0 20000 RW FVS
23.4.61 4330 Fieldbus S->M16 ipa FBM2SIPA 0 0 20000 RW FVS
Setting of the parameter to associate with the bus channel. The default setting is 0, which means channel not active.
When setting a parameter, the format is also automatically set in the sys parameter
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
23.4.2 4182 Fieldbus S->M1 sys ENUM Not assigned 0 10 RW FVS
23.4.6 4192 Fieldbus S->M2 sys ENUM Not assigned 0 10 RW FVS
23.4.10 4202 Fieldbus S->M3 sys ENUM Not assigned 0 10 RW FVS
23.4.14 4212 Fieldbus S->M4 sys ENUM Not assigned 0 10 RW FVS
23.4.18 4222 Fieldbus S->M5 sys ENUM Not assigned 0 10 RW FVS
23.4.22 4232 Fieldbus S->M6 sys ENUM Not assigned 0 10 RW FVS
23.4.26 4242 Fieldbus S->M7 sys ENUM Not assigned 0 10 RW FVS
23.4.30 4252 Fieldbus S->M8 sys ENUM Not assigned 0 10 RW FVS
23.4.34 4262 Fieldbus S->M9 sys ENUM Not assigned 0 10 RW FVS
23.4.38 4272 Fieldbus S->M10 sys ENUM Not assigned 0 10 RW FVS
23.4.42 4282 Fieldbus S->M11 sys ENUM Not assigned 0 10 RW FVS
23.4.46 4292 Fieldbus S->M12 sys ENUM Not assigned 0 10 RW FVS
23.4.50 4302 Fieldbus S->M13 sys ENUM Not assigned 0 10 RW FVS
23.4.54 4312 Fieldbus S->M14 sys ENUM Not assigned 0 10 RW FVS
23.4.58 4322 Fieldbus S->M15 sys ENUM Not assigned 0 10 RW FVS
23.4.62 4332 Fieldbus S->M16 sys ENUM Not assigned 0 10 RW FVS
When setting the sorg parameter the format is automatically set on the relative sys. If sorg is set to null, the
data format does not change. The value of the format can be selected from the following list, according to the
parameter selected as the source:
0 Not assigned
1 Count 16
2 Count 32
3 Fill 16
4 Fill 32
5 Mdplc 16
6 Mdplc 32
7 Eu
8 Eu oat
9 Par 16
10 Par 32
If set to 0 the channel is not assigned.
If set to 1 the datum is assigned a 16-bit count.
If set to 2 the datum is assigned a 32-bit count.
If set to 3 16 bits on the channel are reserved for the datum, not used.
If set to 4 32 bits on the channel are reserved for the datum, not used.
If set to 5 the datum is assigned a 16-bit count used by MDPLC.
If set to 6 the datum is assigned a 32-bit count used by MDPLC.
If set to 7 the datum is assigned engineering units on a 16-bit integer.

gefran ADV200 Specifications

General

Brand	gefran
Model	ADV200
Category	Inverter
Language	English