GEM 1435 ePos - Order Data

7 Order data
The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Note: Pneumatic connecting components (union and compressed air tube) for the connection between the process valve and
positioner are included with each positioner.
Note: A valve specific mounting kit is required for assembly. For designing the mounting kit, the valve type, nominal size, control
function and actuator size must be stated.
Order codes
1 Type Code
Electro-pneumatic positioner
ePos
1435
2 Fieldbus Code
Without 000
3 Accessory Code
Accessory Z
4 Action Code
Single acting 1
Double acting 3
5 Explosion-proof class Code
Without explosion-proof rating 0
6 Option Code
Without 0
Electrical connections M12, 5-pin 1
4–20 mA, actual value output 2
4- 20 mA, actual value output,
electrical connections M12, 5-pin
3
4 - 20 mA, actual value output,
heating element
4
6 Option Code
Electrical connections M12, 5-pin,
heating element
5
Heating element 6
4 - 20 mA, actual value output,
electrical connections M12, 5-pin,
heating element
7
7 Flow rate Code
Electro-pneumatic, 50 l/min 01
Electro-pneumatic, 90 l/min (Booster) 02
8 Special specification Code
Without
Dead zone presetting2% 2442
Dead zone presetting5% 2443
Inversed direction,
for quarter turn valves control function NO (2)
6960
9 CONEXO Code
Without
Integrated RFID chip for electronic identification and
traceability
C
Order example
Ordering option Code Description
1 Type 1435 Electro-pneumatic positioner
ePos
2 Fieldbus 000 Without
3 Accessory Z Accessory
4 Action 1 Single acting
5 Explosion-proof class 0 Without explosion-proof rating
6 Option 0 Without
7 Flow rate 01 Electro-pneumatic, 50 l/min
8 Special specification Without
9 CONEXO Without
7 Order data
www.gemu-group.com10 / 71GEMÜ 1435 ePos