www.gemu-group.com 67 / 71 GEMÜ 1435 ePos
19 Inspection and maintenance
WARNING
The equipment is subject to pressure!
▶ Risk of severe injury or death
● Depressurize the plant.
● Completely drain the plant.
CAUTION
Use of incorrect spare parts!
▶ Damage to the GEMÜ product
▶ Manufacturer liability and guarantee will be void
● Use only genuine parts from GEMÜ.
CAUTION
Hot plant components!
▶ Risk of burns
● Only work on plant that has cooled
down.
NOTICE
Exceptional maintenance work!
▶ Damage to the GEMÜ product
● Any maintenance work and repairs not described in these
operating instructions must not be performed without
consulting the manufacturer first.
19.1 Cleaning the product
- Clean the product with a damp cloth.
- Do not clean the product with a high pressure cleaning
device.
20 Disassembly
1. Disassemble in reverse order to assembly.
2. Unscrew the electrical wiring.
3. Deactivate the control medium.
4. Disconnect the control medium line(s).
5. Disassemble the product. Observe warning notes and
safety information.
21 Disposal
1. Pay attention to adhered residual material and gas diffu-
sion from penetrated media.
2. Dispose of all parts in accordance with the disposal regu-
lations/environmental protection laws.
22 Returns
Legal regulations for the protection of the environment and
personnel require that the completed and signed return deliv-
ery note is included with the dispatch documents. Returned
goods can be processed only when this note is completed. If
no return delivery note is included with the product, GEMÜ
cannot process credits or repair work but will dispose of the
goods at the operator's expense.
1. Clean the product.
2. Request a return delivery note from GEMÜ.
3. Complete the return delivery note.
4. Send the product with a completed return delivery note to
GEMÜ.
22 Returns
To Next Page
Loading...
