Genelec GLM 4 User Manual

Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual page 69 of 87
9 Stand-Alone Operation
SAM monitors and subwoofers are set up and calibrated using GLM management network and
GLM user interface software.
After setup, monitors, subwoofers and the GLM adapter can also operate without having a
computer connected to the GLM adapter. This is called stand-alone operation. The functions
related to stand-alone mode include
 storing all calibration settings permanently into monitors and subwoofers
 using the GLM adapter as a volume control interface
9.1 Storing values permanently in monitors and subwoofers
SAM monitors and subwoofers retain their settings after storing the settings inside the monitors
and subwoofers. In some monitors and subwoofers, the ‘Stored Controls’ switch must be
turned ON for the stored settings to have an effect!
Storing is done in the ‘Group Presets’ menu and ‘Store to Loudspeakers’ menu command.
Settings that are stored
 Current Group Acoustic Settings
 Standalone Volume Control Max Level
 Startup Level
 ISS sleep delay settings
 ISS sensitivity settings
 LED usage settings
 Input Selection

Genelec GLM 4 Specifications

General

Brand	Genelec
Model	GLM 4
Category	Speaker System
Language	English