Generac Power Systems Magnum MGG100M User Manual

Operation
36 MGG100M Operating Manual 36833 C
Re-starting After Emergency Shut-Down
1. Verify the MLCB is OFF (O).
2. Pull the EMERGENCY STOP switch.
3. On controller, acknowledge the EMERGENCY STOP shutdown alarm. See Unit Alarms and Warnings for more
information.
4. Turn key switch to OFF.
5. Switch the MLCB to ON (I).
6. Start unit. See Starting Unit for more information.

Generac Power Systems Magnum MGG100M Specifications

General

Brand	Generac Power Systems
Model	Magnum MGG100M
Category	Inverter
Language	English