VT HYBRID 9mt 4x150W LED
TL187-01-00-00
01-07-2016
14.9 TOIMINTATAPA – OPERATING MODE
Valotornin tärkeimmät ohjaimet ovat luukun
sisällä. Luukussa on kahva ja turvalukko. Näin
asiaankuulumattomat eivät pääse ohjaimiin
käsiksi.
All control gears, switches and toggles of the
unit are installed on the control cabinet. It is
provided a door with handle with safety lock
to prevent that the unauthorised personal
handlings the commands.
14.9.1 SYÖTTÖ VERKOSTA – MAINS SUPPLY
Yksikkö voi saada virtansa yksivaihelinjasta
230–240 V 50 Hz. Varmista, että kyseisessä
linjassa on soveltuva ylivirtasuojin varustettu
vikavirtasuojakytkin.
Utility mains 230-240 V 50 Hz single phase
can be used as power supply for the unit.
Ensure the incoming line is provided of
adeguate RCD and MCB protection.
Liitä koiraspistoke 230÷240 V 16 A 2p+T IP67
CEE (kuva 8) ominaisuuksiltaan samanlaiseen
pistorasiaan.
Connect to the male plug 230÷240 V 16 A
2p+T IP67 EEC (Fig. 8) the incoming line
cable by means of a socket with the same
characteristics.
Liitäntäjohtojen vähimmäisläpimitta on valittava
jännitteen, asennetun tehon ja lähteen ja
käytön välisen etäisyyden perusteella.
Cross section and insulation characteristics
of connection cables shall be choose
accordingly to the ampere and voltage input
ratings, taking into account the distance
between the source and the unit.
(Kuva – Fig. 8)