3-13
03
System Operation
•
Crashworthiness
Pre-active Safety Seat limits
passenger’s movement and decreases
the chance of injury from the early
stage of collision by reducing the seat
belt interval with putting the seat in
the upright position. The operation
conditions are as follows.
- It is considered as a risky situation
due to emergency braking.
- It is considered as a dangerous
situation due to the difficulties of
vehicle operation.
- It is considered as a hazardous
situation due to vehicle distance
detection sensor.
•
Driving stability
Pre-active Safety Seat pulls up the
backset while sudden braking or
rapid turning to boost the tightness of
seat belt in order to prevent leaning
forward or laterally and increase
driving stability. The operation
conditions are as follows.
- There is a leaning forward of the
upper body due to sudden braking.
- There is a lateral leaning of the
upper body because of rapid
turning.
- Driving on the slippery frozen road
- Driving on the unpaved road
- High risk of rollover
WARNING
While the system operates
automatically, please do not be
surprised or misunderstand it as a
system failure.
•
Inoperative status
If the passenger adjusts the
seat manually, the system stops
immediately. However, it restarts to
operate after 5 seconds when the
hazardous signal continues.
•
Malfunction
If the Pre-active Safety Seat system
does not operate properly, we
recommend that you have the vehicle
inspected by an authorized retailer of
Genesis Branded products.