6-26
Driving your vehicle
Vehicle-to-vehicle distance
recognition sensor (Front radar)
OJWEV061059LOJWEV061059L
[1]: Front radar
For detail location of sensor, refer to the
picture above.
In order for the Smart Recuperation
System to operate properly, always make
sure the radar sensor cover is clean and
free of dirt, snow, and debris. Dirt, snow,
or foreign substances on the lens may
adversely affect the sensing performance
of the sensor. In this case, the system
operation may stop temporarily and not
operate normally.
CAUTION
• Do not apply license plate frame or
foreign objects such as a bumper
sticker or a bumper guard near the
radar sensor. Doing so may adversely
affect the sensing performance of
the radar.
•
Always keep the radar sensor and
lens cover clean and free of dirt and
debris.
•
Use only a soft cloth to wash the
vehicle. Do not spray pressurized
water directly on the sensor or
sensor cover.
•
Be careful not to apply unnecessary
force on the radar sensor or sensor
cover. If the sensor is forcibly
moved out of proper alignment,
the Smart Recuperation System
may not operate correctly. In this
case, a warning message may
not be displayed. We recommend
that the vehicle be inspected by
an authorized retailer of Genesis
Branded products.
•
If the front bumper becomes
damaged in the area around the
radar sensor, the Smart Recuperation
System may not operate properly.
We recommend that the vehicle be
inspected by an authorized retailer of
Genesis Branded products.
•
Use only genuine Genesis parts
or the equivalent specified for
your vehicle to repair or replace a
damaged sensor or sensor cover. Do
not apply paint to the sensor cover.
To Next Page
Loading...
