Genesis GV60 - Driving Electric Vehicle; How to Start the Vehicle; How to Stop the Vehicle

1-54
Foreword / Electric vehicle system overview
How to start the vehicle
1. Holding the smart key, sit in the
driver’s seat.
2.
Fasten the seat belt before starting
the vehicle.
3. Make sure to engage the parking
brake.
4.
Turn OFF all electrical devices.
5.
Make sure to depress and hold the
brake pedal.
6. While depressing the brake pedal,
shift to P (Park).
7.
Depress and hold the brake pedal
while pressing the Start/Stop button.
OJWEVQ012034OJWEVQ012034
8. When the ready ( ) indicator is
ON, you can drive the vehicle.
When the ready (
) indicator is
OFF, you cannot drive the vehicle.
Start the vehicle again.
9.
Depress and hold the brake pedal and
shift to the desired position.
Information
While the charging cable is connected, the
gear cannot be shift from P (Park) to any
other gear for safety reasons.
10. Release the parking brake and slowly
release the brake pedal. Check if the
vehicle slowly moves forward, then
depress the accelerator pedal.
How to stop the vehicle
1. Hold down the brake pedal while the
vehicle is parked.
2. While depressing the brake pedal,
shift to P (Park).
3.
While depressing the brake pedal,
engage the parking brake.
4.
While depressing the brake pedal,
press the Start/Stop button and turn
off the vehicle.
OJWEVQ012035OJWEVQ012035
5. Check if the ready ( ) indicator is
turned OFF on the instrument cluster.
When the ready (
) indicator is
ON and the gear is in a position other
than P (Park), the driver can accidently
depress the accelerator pedal, causing
the vehicle to move unexpectedly.
DRIVING ELECTRIC VEHICLE