Genesis GV60 - DSM Camera Defroster; Setting the DSM Screen Brightness

5-66
Convenience features
Setting wide view operation
OJWEV051093OJWEV051093
Use the DSM camera selection lever (1)
to select L (Left) or R (Right).
•
When you shift to R (Reverse), the
DSM monitors will display wide view.
•
If you put the DSM camera selection
lever (1) in the center, the DSM
monitors will not display wide view.
CAUTION
If there is an error in the digital side
mirror, the DSM monitors will not
display the rear view and a warning
message informing you to check
the DSM system will appear on the
instrument cluster. If this occurs, check
the surroundings using the inside
rearview mirror and immediately park
your vehicle at a safe place, and contact
an authorized retailer of Genesis
Branded products.
Setting the DSM screen
brightness
With the Start/Stop button in the ON
position, on the infotainment system,
select ‘Setup → Display → Screen
Brightness’ to change the brightness.
•
Automatic Brightness or Manual
Brightness adjustment (if equipped
with rain sensor)
•
Screen Brightness (Day/Night) setting
(if the rain sensor is not equipped)
Information
The infotainment system setup menu
may change after updates. For detailed
information, refer to the web manual of
the infotainment system.
DSM camera defroster
To turn on the defroster manually, turn
on the wiper or rear window defroster.
The feature will be activated for a certain
time