Genesis GV60 - High Beam Assist (HBA); High Beam Assist Setting

5-100
Convenience features
HIGH BEAM ASSIST (HBA) (IF EQUIPPED)
ORG3EV051075ORG3EV051075
High Beam Assist will automatically
switch between high beam and low
beam depending on the detected
brightness from the lamps of oncoming
vehicles or vehicles in front.
Detecting sensor
OJWEV051058 OJWEV051058
[1]: Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
• Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
•
For more details on the precautions
of the front view camera, refer
to "Forward Collision-Avoidance
Assist (FCA) (if equipped)" section in
chapter 7.
High Beam Assist setting
OJWEV051248LOJWEV051248L
With the Start/Stop button in the ON
position, select ‘Lights → High Beam
Assist (or HBA (High Beam Assist))’
from the Settings menu to turn on High
Beam Assist and deselect to turn off the
function.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe
location.