5-97
05
Intelligent Front-Lighting System secures
a clear view for the driver with the high
beam on while driving at night.
System setting
OJWEV051247LOJWEV051247L
With the Start/Stop button in the ON
position, select ‘Lights → Intelligent High
Beams (or Smart High Beam)’ from the
Settings menu to turn on Intelligent
Front-Lighting System and deselect to
turn off the system.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe
location.
Information - For Europe
• Travel Mode must be turned on for the
headlamp on the driver’s side to turn
off when driving from a left-hand drive
country to a right-hand drive country
and vice versa.
•
To turn on the Travel mode, select
‘Settings → Light →Travel Mode’ from
the infotainment system screen.
System operation
Display and control
ORG3EV051075ORG3EV051075
After selecting ‘Intelligent High Beams’
in the Settings menu, Intelligent Front-
Lighting System will operate by following
the procedure below.
•
Place the headlamp switch in the
AUTO position and push the head
lamp lever toward the instrument
cluster. The Intelligent Front-Lighting
System (
) indicator light will
illuminate on the cluster and the
system will be enabled.
•
When the system is enabled, the
Intelligent Front-Lighting System will
operate according to the set speed in
the infotainment system. The initial
system is set to work when vehicle
speed is above 40 km/h (25 mph).
•
The high beam LED partially turns off
if an oncoming vehicle or a vehicle
ahead is detected by the front view
camera.
INTELLIGENT FRONT-LIGHTING SYSTEM (IFS) (IF EQUIPPED)
To Next Page
Loading...
