Genesis GV60 - Face Connect; Face Connect Settings

5-27
05
FACE CONNECT (IF EQUIPPED)
Face Connect allows the driver to lock
and unlock the vehicle without a smart
key, by recognizing the driver’s face.
Register the face in the ‘Driver Profile’
from the infotainment system to use
Face Connect. A maximum of 2 faces can
be registered, one for each driver profile.
Face Connect Settings
The driver can register a new face or
delete the registered face from the
profile menu in the infotainment system.
Registering face
OJWEV051010NOJWEV051010N
[A]: face recognition camera.
1. Place both smart keys inside the
vehicle.
2.
Select ‘Vehicle Settings → User
Profile
→ Driver 1 or Driver 2’ from the
infotainment system while the Start/
Stop butt
on is ON.
3.
Enter the profile password and
select ‘Face Register/Remove
→
Register’. The circular light on the face
recognition camera illumina
tes in
white and starts rotating.
It indicates the progress of face
registration:
Progress Circular light (A)
Face registration in
progress
Rotating in white
Face registration
completed
Green
Face registration
failed
Red
4. Follow the instruction and exit the
vehicle. Look into the camera lens
while keeping your face 0.3 m – 0.8
m away from the camera. The system
will start registering your face.
•
Keep the driver’s door opened
while registering your face. Audio
guidance may be provided from the
speaker inside the vehicle.
•
If the audio guidance is provided
while the door and window are
both closed, the window may open
automatically.
•
Check if the camera lens is covered
with foreign substances such as
raindrop or dust. If so, clean the
camera lens before registering your
face.