5-48
Convenience features
Integrated Memory System for the
driver’s seat is provided to store and
recall the following memory settings with
a simple button operation.
•
Driver’s seat position
•
Steering wheel position (power
adjustment)
• Outside rearview mirror position
•
Head-Up Display (HUD) position (if
equipped)
WARNING
Never attempt to operate the
integrated memory system while the
vehicle is moving.
This could result in loss of control, and
an accident causing death, serious
injury, or property damage.
Information
• If the battery is disconnected, the
memory settings will be erased.
•
If integrated memory system does not
operate normally, we recommend that
you have the system inspected by an
authorized retailer of Genesis Branded
products.
Storing memory positions
1. Shift to P (Park) while the Start/Stop
button is in the ON position.
2. Adjust the driver’s seat position,
outside rearview mirror position,
steering wheel position and head-up
display height to the desired position.
3.
Press and hold the memory buttons
(1 or 2). The system will beep once
and notify you ‘Press button to save
settings’ on the cluster display.
4.
Press one of the memory buttons (1
or 2) within 4 seconds. The system
will beep twice when the memory has
been successfully stored.
5.
‘Settings 1 (or 2) saved’ will appear
on the cluster display. The message
appears only for the driver’s seat
position memory setting.
INTEGRATED MEMORY SYSTEM (IF EQUIPPED)
OOJWEVJWEV051023051023
To Next Page
Loading...
