Genesis GV60 - Displaying the Guidelines; DSM Warnings and Indicators; Operating the Digital Side Mirrors

5-62
Convenience features
Operating the digital side
mirrors
Turning on the DSM monitors
When you unlock the doors or start the
vehicle remotely, the digital side mirrors
will prepare for operation. When you
open a door or unfold the DSM cameras,
the DSM monitors will turn on.
Turning off the DSM monitors
• When you stop the vehicle and
lock the doors, or seven minutes
after stopping the vehicle, the DSM
monitors will automatically turn off
and the DSM cameras will fold.
•
If you fold the DSM cameras while the
vehicle is on, the DSM monitors will
display a black screen and notify you
that the digital side mirrors are folded.
•
The DSM monitors are automatically
turned on or off based on various
conditions, such as the vehicle and
door status.
DSM warnings and indicators
The warnings and indicators displayed on
the DSM monitors are as follows.
Explanation
Driving assistance warning
•
Blind-Spot Collision-
Avoidance Assist (BCA)
•
Safe Exit Warning/Assist
(SEW/SEA)
•
Rear Cross-Traffic Collision-
Avoidance Assist (RCCA)
DSM check indicator
OFF
DSM monitor off indicator
•
Displayed after seven
minutes after the vehicle
stops
•
Counts 10 seconds for screen
off
WIDE
Wide view mode switch
indicator
Displaying the guidelines
When you turn on the turn signal
indicator to change lanes, the rearview
screen and the lane change guidelines
will be displayed on the DSM monitors.
•
Red: 3 m away from the rear of the
vehicle
• Orange: 12 m away from the rear of
the vehicle