9-33
09
Instrument panel fuse 
replacement
 Driver’s sideDriver’s side
OJWEV091012 OJWEV091012 
1.  Turn the vehicle off.
2.
  Turn all other switches off.
3.
  Open the fuse panel cover.
4.
  Refer to the label on the inside of 
the fuse panel cover to locate the 
suspected fuse location.
OJWEV091007 OJWEV091007 
5.  Pull the suspected fuse straight out. 
Use the removal tool (1) provided in 
the motor compartment fuses panel.
6.
  Check the removed fuse; replace it if 
it is blown. Spare fuses are provided in 
the instrument panel fuse panels (or in 
the motor compartment fuse panel).
7.
  Push in a new fuse of the same rating, 
and make sure it fits tightly in the 
clips. If it fits loosely, we recommend 
that you consult an authorized retailer 
of Genesis Branded products.
In an emergency, if you do not have 
a spare fuse, use a fuse of the same 
rating from a circuit you may not need 
for operating the vehicle, such as the 
cigarette lighter fuse.
If the headlamps or other electrical 
components do not work and the fuses 
are undamaged, check the fuse panel 
in the motor compartment. If a fuse is 
blown, it must be replaced with the same 
rating.