4-33
04
OJWEV041025LOJWEV041025L
Driving Assist, Turn by Turn, Utility view
modes are displayed in the center of the
cluster display.
Driving assist view
OJWEV041005 OJWEV041005
The status of Lane Keeping Assist, Smart
Cruise Control, Lane Following Assist,
Highway Driving Assist, etc., is displayed
when Driving Assist view is selected.
For more details, refer to each function
information section in chapter 7.
Utility view
In the Utility view, using the , (UP,
DOWN) switch, you may change through
items in the following order.
OJWEV041025LOJWEV041025L
Drive info
This display shows the trip distance, the
average energy consumption, and the
total driving time.
The information is combined for each
ignition cycle.
To manually reset the information, triple
press the (
) button when viewing the
Drive Info. The trip distance, the average
energy consumption, and total driving
time will reset simultaneously.
The driving information will continue to
be counted while the vehicle is in the
ready (
) mode (for example, when
the vehicle is in traffic or stopped at a
stop light.)
Information
The vehicle must be driven for a minimum
of 300 meters (0.19 miles) since the last
ignition key cycle before the driving
information is recalculated.
To Next Page
Loading...
