Genesis GV60 - Motor Compartment Panel Fuse Replacement

9-34
Maintenance
Motor compartment panel fuse
replacement
Blade fuse / Cartridge fuse
 Blade type fuseBlade type fuse
OJWEV091008 OJWEV091008
 Cartridge type fuseCartridge type fuse
OJWEV091009OJWEV091009
1. Turn the vehicle off.
2.
Turn all other switches off.
3.
Remove the fuse panel cover by
pressing the tap and pulling up.
4.
Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the removal tool in the motor
compartment fuse panel.
5.
Push in a new fuse of the same rating,
and make sure it fits tightly in the
clips. If it fits loosely, we recommend
that you consult an authorized retailer
of Genesis Branded products.
NOTICE
After checking the fuse panel in the
motor compartment, securely install
the fuse panel cover. You may hear a
clicking sound if the cover is securely
latched. If it is not securely latched,
electrical failure may occur from water
contact.
Multi fuse
 Multi typeMulti type
OJWEV091010OJWEV091010
If the multi fuse or midi fuse is blown,
we recommend that you consult an
authorized retailer of Genesis Branded
products.