Genesis GV60 - Page 212

5-15
05
4. Press the ‘Save’ button from the
infotainment system screen. The
saving process begins automatically.
•
When the digital key (smart phone)
is saved, a message appears on the
infotainment system screen.
Information
• If you want to register a digital key
(smart phone) again, refer to ‘How to
Delete Digital Key (Smart Phone)’ and
delete the digital key (smart phone)
before re-registering.
•
During the digital key saving process,
the process will cancel when:
- The smart phone is removed from the
vehicle authentication pad (wireless
charging pad)
•
The infotainment system screen is
changed
- The vehicle is turned off
- The gear is shifted
•
The registering process does not start if
both smart keys are not in the vehicle.
Only in Europe, two smart keys should
be in the vehicle.
•
Some smart phones may not start the
registering process depending on the
internal structure. Move the smart
phone to the left or right on the vehicle
authentication pad (wireless charger
pad) and try registering the smart
phone.
•
The infotainment system may change
after software updates. For more
information, refer to the manual
provided in the infotainment system
and the quick reference guide.
Using the digital key (smart phone)
Digital key touch control
The driver can lock or unlock the door by
placing the smart phone on the outside
door handle, and the vehicle can be
started by placing the smart phone on
the vehicle authentication pad (wireless
charging pad).
Digital key close proximity control
•
If you have the smart phone in
possession, the doors can be locked
or unlocked without touching the
smart phone to the door handle, but
by touching the door lock/unlock
sensor (engraved part) on the door
handle. Also, the vehicle can be
started by pressing the Start/Stop
button without placing the smart
phone on the vehicle authentication
pad (wireless charging pad).
• When the smart phone and vehicle is
connected by Bluetooth, the Remote
Start and Door Lock/Unlock functions
are available using the App provided
by the smart phone manufacturer.
Information
• Digital key close proximity control
is only available for Ultra Wide Ban
supported smart phone digital keys.
To use the function, the smart phone’s
Bluetooth must be activated.
•
The necessary distance between the
smart phone and vehicle for Bluetooth
connection may vary depending on the
surroundings of the vehicle and smart
phone.