5-17
05
Information
• You cannot lock your vehicle using the
digital key (smart phone) if any of the
following occurs:
- The smart key is in the vehicle.
- The Start/Stop button is in the ACC
or ON position.
- Any of the doors, hood, or tailgate
are open.
•
The door may not unlock automatically
if you stay near the vehicle for several
minutes with the Ultra Wide Band
supported smart phone in possession.
•
If the smart phone is kept in the
back pocket or bag, it may cause poor
Bluetooth connection, or the door lock/
unlock or vehicle start-up operation my
be delayed.
•
The infotainment system may change
after software updates. For more
information, refer to the manual
provided in the infotainment system
and the quick reference guide.
Starting the vehicle
•
Ultra Wide Band unsupported smart
phone
After placing your registered digital
key (smart phone) on the vehicle
authentication pad (wireless charging
pad), depress the brake pedal and
press the Start/ Stop button.
•
Ultra Wide Band supported smart
phone
With the smart phone inside the
vehicle, depress the brake pedal and
press the Start/Stop button.
To start the vehicle remotely, use the
App provided by the smart phone
manufacturer to lock the vehicle with
the door lock button, and press the
remote start button within 4 seconds.
The vehicle starts and the hazard
warning lights blink.
Press the remote start button again to
turn off the vehicle.
After starting the vehicle, the digital key
(smart phone ) may be removed from
the vehicle authentication pad (wireless
charging pad).
For more details on the basic way to
start the vehicle, refer to the "Start/Stop
button" section in chapter 6.
To Next Page
