Genesis GV60 - Page 233

5-36
Convenience features
NOTICE
• Observe the following restrictions
during the update.
- You cannot use the vehicle during
the update. Be sure to have
enough time for the update, and
safely park the vehicle before
starting the update process.
- You cannot use remote features,
including remote start.
- If the update includes the digital
key function, the door lock/unlock
function via the digital key may not
work. If the digital key function is
updated by checking the notice,
use the button on the smart key to
lock or unlock the door.
- Vehicle charging is not available,
For electrified vehicles, charge
the vehicle after the update is
completed.
- The Rear Occupant Alert feature
may not work. Check if there are
any occupant in the rear seat.
•
The update will be automatically
canceled if any vehicle conditions
required for the update are changed
before starting the update.
•
Once the update has started, you
cannot cancel the update.
• Do not touch the internal electrical
components during software
updates. The high voltage related
modules for charging the 12 V
battery may operate during software
updates.
•
Note that the high-voltage-related
modules for charging the 12 V battery
may work during the update. (EV
vehicle)
•
You cannot use the OTA software
update feature if you modify or
replace any vehicle software.
•
Do not open the hood or replace the
battery during updates. The update
may fail.
•
If a diagnostic tool is connected
to the vehicle OBD (On-board
Diagnostic) terminal, the vehicle
cannot be updated. The update will
proceed by removing the connected
diagnostic tool from the ODB
terminal and restarting the vehicle.
•
If the update does not complete
successfully, we highly recommend
you to contact Genesis.